RASOR PNEUMATIC HAND SHEARS FP862MT (86MM)

RASORSKU: FP862MT

This hand-held cutting tool is already become the most appreciated composite cutting tool all over the world.

The new FP862MT cuts easily glass fiber, carbon fiber and kevlar up to a cutting thickness of 25mm.

It weights only 1100 grams and the particular geometry between the knife and carbide counterblade combined with an innovative shape of the foot allow the cut of composite material with an extraordinary speed and precision.

Especially the shape of the front peak allows the application of this cutting tool for edge trimming i.e. mould trimming. Furthermore, these particular building geometry avoid totally the trouble on winding for composite material such as the winding of the fiber behind the knife.

Air compressed motor is wholly made by Rasor. thanks to the latest generation mechanical and pneumatic components, this excellent turbine reaches a power of 400W with 20,000 RPM and a very high torque.

The diameter of motor is now of 40mm only, the smallest within its category. The rotor blade are made of VANESTAR material which reduce to the minimum the weight and the friction.

The motor housing is now PTFE coated for heat reducing with an aggressive "look". RPM is now 1400 for ultra fast cut. The push button sharpening stone allows the sharpening of the knife edge to be done in less than 10 seconds without removing the knife.

The new fixed rear protection is now transparent plastic made to have more visibility during the cutting operations. Nowadays most of the producers/end users of composite material use normally model FP862MT for their cutting operations. Automotive, Shipbuilding and Aerospace Industry are the fields where this model FP862MT is mainly applied.

Blade diameter 86 mm (3.4″), with hard metal counterblade
Blade descr. 86THSS, 8-edges, HSS steel
Blade speed  1400 r.p.m*
Cutting ability 25 mm (1″)
Power  400 W (at nominal air supply conditions)*
Working pressure 6 bar* (±1 bar) with lubricated air
Air consumption 9 l/sec*
Net weight 1100 g
Total weight (with packaging) 1995 g
Sound pressure 72 dB (EN ISO 15744)*
Vibrations at start up 1,36 m/sec2 (ISO 8662)*
Minimum brightness for working operations LUX 200
Temperature range 0 – 55 C
Umidity range 10 – 95% without condensate * The reported data are collected at a pressure of 6 bar (ISO 2787: 1984), recommended operating pressure
Price:
Sale price£1,245.60 Sale price£1,038.00inc. VAT exc. VAT Shipping calculated at checkout
Stock:
Out of Stock

This hand-held cutting tool is already become the most appreciated composite cutting tool all over the world.

The new FP862MT cuts easily glass fiber, carbon fiber and kevlar up to a cutting thickness of 25mm.

It weights only 1100 grams and the particular geometry between the knife and carbide counterblade combined with an innovative shape of the foot allow the cut of composite material with an extraordinary speed and precision.

Especially the shape of the front peak allows the application of this cutting tool for edge trimming i.e. mould trimming. Furthermore, these particular building geometry avoid totally the trouble on winding for composite material such as the winding of the fiber behind the knife.

Air compressed motor is wholly made by Rasor. thanks to the latest generation mechanical and pneumatic components, this excellent turbine reaches a power of 400W with 20,000 RPM and a very high torque.

The diameter of motor is now of 40mm only, the smallest within its category. The rotor blade are made of VANESTAR material which reduce to the minimum the weight and the friction.

The motor housing is now PTFE coated for heat reducing with an aggressive "look". RPM is now 1400 for ultra fast cut. The push button sharpening stone allows the sharpening of the knife edge to be done in less than 10 seconds without removing the knife.

The new fixed rear protection is now transparent plastic made to have more visibility during the cutting operations. Nowadays most of the producers/end users of composite material use normally model FP862MT for their cutting operations. Automotive, Shipbuilding and Aerospace Industry are the fields where this model FP862MT is mainly applied.

Blade diameter 86 mm (3.4″), with hard metal counterblade
Blade descr. 86THSS, 8-edges, HSS steel
Blade speed  1400 r.p.m*
Cutting ability 25 mm (1″)
Power  400 W (at nominal air supply conditions)*
Working pressure 6 bar* (±1 bar) with lubricated air
Air consumption 9 l/sec*
Net weight 1100 g
Total weight (with packaging) 1995 g
Sound pressure 72 dB (EN ISO 15744)*
Vibrations at start up 1,36 m/sec2 (ISO 8662)*
Minimum brightness for working operations LUX 200
Temperature range 0 – 55 C
Umidity range 10 – 95% without condensate * The reported data are collected at a pressure of 6 bar (ISO 2787: 1984), recommended operating pressure

Delivery is FREE on all orders over £150.00 excluding VAT.  For all orders under £150.00, the delivery cost will be £3.95. We send all items using Parcelforce Next Working Day delivery. All orders are dispatched the same day (3pm cutoff).

Please check any deliveries as they arrive and any claims made by the customer should be made in writing within 14 days of the despatch date.

If a product is unavailable to purchase online, please contact us and we will confirm pricing and delivery time.

If goods are received damaged or incorrect Tacura Limited will arrange a collection and exchange or refund the goods accordingly.

In any other circumstances, e.g. goods that have been ordered incorrectly, the customer will be responsible to return the goods to Tacura Limited at their cost and will be subject to a 7% restocking charge.

Any returned goods must be undamaged, unused and in a resaleable condition.

Please check any deliveries as they arrive and any claims made by the customer should be made in writing within 14 days of the despatch date. Returns will not be accepted more than 14 days after the date of delivery.

You may also like

Recently viewed