RASOR PNEUMATIC HAND SHEARS FP702 (70MM)

RASORSKU: FP702

The new model FP702 is the best compromise between weight and power in the field of professional pneumatic hand-held cutting tools.

The air motor is wholly made by Rasor. The new turbine have now 5 blades that assure higher power and torque reaching 380W in 16.000 RPM/turbine.

The motor diameter is 40mm only, the smallest one in its range. The rotor blades are made of patented VANESTAR, material that minimize weight and friction.

The new coupling gear in bronze and steel now reach 1300 RPM/knife to cut faster.

On this new model the motor housing is PTFE coated to reduce more the heating on the cutting assembly.

FP702 is able to cut any kind of material at the flexible state up to maximum cutting thickness of 18mm.

This is the reason why this model is normally applied in textile, technical fabric and composite material field.

The high torque allows to cut even rubber materials and plastics in carpet and flooring application.

The base foot is steel made, strong and small size so to allow a easy and precise cut of straight or curved sections.

The push button sharpener allows the sharpening of the knife edge to be done in less than 10 seconds without removing the knife.

The fixed rear knife protection case is transparent plastic made to have more visibility during the cutting operations.FP702 is the best solution able to satisfy any need in the field of professional cutting tool weighting 920 grams only.

Blade diameter 70 mm (2.75″), with hard metal counterblade
Blade descr. 70EHSS, 6-edges, HSS steel
Blade speed  1300 r.p.m*
Cutting ability 18 mm (0.7″)
Power 380 W (at nominal air supply conditions)*
Working pressure 6 bar* (±1 bar) with lubricated air
Air consumption 9 l/sec*
Net weight 920 g
Total weight (with packaging) 1750 g
Sound pressure 72 dB (EN ISO 15744)*
Vibrations at start up 1,36 m/sec2 (ISO 8662)*
Minimum brightness for working operations LUX 200
Temperature range 0 – 55 C
Umidity range 10 – 95% without condensate * The reported data are collected at a pressure of 6 bar (ISO 2787: 1984), recommended operating pressure
Price:
Sale price£1,146.03 Sale price£955.03inc. VAT exc. VAT Shipping calculated at checkout
Stock:
In stock

The new model FP702 is the best compromise between weight and power in the field of professional pneumatic hand-held cutting tools.

The air motor is wholly made by Rasor. The new turbine have now 5 blades that assure higher power and torque reaching 380W in 16.000 RPM/turbine.

The motor diameter is 40mm only, the smallest one in its range. The rotor blades are made of patented VANESTAR, material that minimize weight and friction.

The new coupling gear in bronze and steel now reach 1300 RPM/knife to cut faster.

On this new model the motor housing is PTFE coated to reduce more the heating on the cutting assembly.

FP702 is able to cut any kind of material at the flexible state up to maximum cutting thickness of 18mm.

This is the reason why this model is normally applied in textile, technical fabric and composite material field.

The high torque allows to cut even rubber materials and plastics in carpet and flooring application.

The base foot is steel made, strong and small size so to allow a easy and precise cut of straight or curved sections.

The push button sharpener allows the sharpening of the knife edge to be done in less than 10 seconds without removing the knife.

The fixed rear knife protection case is transparent plastic made to have more visibility during the cutting operations.FP702 is the best solution able to satisfy any need in the field of professional cutting tool weighting 920 grams only.

Blade diameter 70 mm (2.75″), with hard metal counterblade
Blade descr. 70EHSS, 6-edges, HSS steel
Blade speed  1300 r.p.m*
Cutting ability 18 mm (0.7″)
Power 380 W (at nominal air supply conditions)*
Working pressure 6 bar* (±1 bar) with lubricated air
Air consumption 9 l/sec*
Net weight 920 g
Total weight (with packaging) 1750 g
Sound pressure 72 dB (EN ISO 15744)*
Vibrations at start up 1,36 m/sec2 (ISO 8662)*
Minimum brightness for working operations LUX 200
Temperature range 0 – 55 C
Umidity range 10 – 95% without condensate * The reported data are collected at a pressure of 6 bar (ISO 2787: 1984), recommended operating pressure

Delivery is FREE on all orders over £150.00 excluding VAT.  For all orders under £150.00, the delivery cost will be £3.95. We send all items using DPD Next Working Day delivery. All orders are dispatched the same day (3pm cutoff).

Please check any deliveries as they arrive and any claims made by the customer should be made in writing within 14 days of the despatch date.

If a product is unavailable to purchase online, please contact us and we will confirm pricing and delivery time.

If goods are received damaged or incorrect Tacura Limited will arrange a collection and exchange or refund the goods accordingly.

In any other circumstances, e.g. goods that have been ordered incorrectly, the customer will be responsible to return the goods to Tacura Limited at their cost and will be subject to a 7% restocking charge.

Any returned goods must be undamaged, unused and in a resaleable condition.

Please check any deliveries as they arrive and any claims made by the customer should be made in writing within 14 days of the despatch date. Returns will not be accepted more than 14 days after the date of delivery.

You may also like

Recently viewed